Experimental Design of Shadow Formation in Optical Devices with 2D Algodoo Simulation


Rachmad Resmiyanto(1*), Novi Ayu Lestari(2)

(1) , Indonesia
(2) SMA Negeri 1 Anyer, Cilegon, Indonesia
(*) Corresponding Author

Abstract


The process of image formation in optical instruments such as the eye, magnifying glass, microscope, telescope, and camera is an important part of learning geometric optics. These concepts are often considered difficult and abstract by students, as the path of light and the process of image formation cannot be directly observed. The conceptual experimental method is used to identify the physical concepts in optical phenomena and translate them into 2D simulations in Algodoo. This study consists of three steps: (1) designing an experiment using Algodoo to model the image formation phenomenon, (2) configuring optical instruments, light sources, rays, and lenses to achieve image formation that aligns with its physical concepts, and (3) conceptually analyzing the simulation results and observing students while using the simulation. The results of the study show that this image formation experiment can be easily understood by students. This is evidenced by the fact that students were able to independently conduct the image formation simulation. Therefore, it can be concluded that the 2D simulation software Algodoo can be used effectively to design image formation experiments in optical instruments.

Keywords


eksperimen, algodoo, alat optik, bayangan

Full Text:

PDF

References


Algoryx Simulation AB. 2024. Algodoo (computer software). Retrieved from http://www.algodoo.com.

Basuki, B. (2023). Penggunaan media laboratorium virtual pada pelatihan di wilayah kerja guru IPA MTs di kantor kementerian agama kabupaten Waykanan dan kabupaten Lampung Selatan. Jurnal Perspektif, 16(1), 47-55.

Coramik, M., & Ürek, H. (2021). Calculation of kinetic friction coefficient with Phyphox, Tracker and Algodoo. Physics Education, 56(6), 065019.

Del Carpio Minaya, R.A., Ponce Atencio, Y. (2020). Virtual Laboratory with Algodoo for the Determination of the Metacentric Height of a Rectangular Vessel. In: Carreño Moreno, V., Vega Saenz, A., Carral Couce, L., Saravia Arenas, J. (eds) Proceeding of the VI International Ship Design & Naval Engineering Congress (CIDIN) and XXVI Pan-American Congress of Naval Engineering, Maritime Transportation and Port Engineering (COPINAVAL). CIDIN COPINAVAL 2019 2019. Springer, Cham. https://doi.org/10.1007/978-3-030-35963-8_32

Euler, E., & Gregorcic, B. (2017). Exploring how students use sandbox software to move between the physical and the formal. In PERC Proceedings (pp. 128–131). Cincinnati, OH. https://doi.org/10.1119/perc.2017.pr.027

Euler, E., & Gregorcic, B. (2019). Algodoo as a microworld: Informally linking mathematics and physics. Mathematics in Physics Education, 355-385.

Fitrianingrum, A. M., & Pawarangan, I. (2024). Identifikasi Konsep Fisika pada Bidang Miring Berbantuan Aplikasi Algodoo. Jurnal FisTa: Fisika dan Terapannya, 5(1), 38-44.

Gregorcic, Bor; Bodin, Madelen: Algodoo: A tool for encouraging creativity in physics teaching and learning.

In: The Physics Teacher, 55 (1), pp. 25–28, 2017.

Halliday, D., Resnick, R., & Walker, J. (1997). Fundamentals of physics (5th ed., extended.). New York: Wiley

Harun, Uğur, and Untung. 2015. Evaluating and Developing Physics Teaching Material with Algodoo in Virtual Environment: Archimedes’ Principle. International Journal of Innovation in Science and Mathematics Education. Vol. 23 (4): 40-50.

Hasibuan, F. A., & Hasibuan, T. (2023). Pengaruh Metode Project Based Learning Terhadap Peningkatan Kreativitas Dan Inovatif Siswa Kelas X SMA Negeri 3 Sibolga. Ta'rim: Jurnal Pendidikan dan Anak Usia Dini, 4(1), 84-93.

Ina, F. A., & Mufit, F. (2022). Penggunaan Aplikasi Adobe Animate Cc Dalam Mendesain Multimedia Interaktif Berbasis Konflik Kognitif Materi Alat-Alat Optik. EduFisika: Jurnal Pendidikan Fisika, 7(2), 222-234.

Kanginan, Marthen. 2007. Seribupena Fisika SMA kelas X jilid 1. Jakarta: Erlangga.

Karyono, Palupi D.S, Suharyanto. 2009. Fisika 1: Untuk SMA dan MA Kelas X. Jakarta: Pusat Perbukuan.

Luky, Novian dan Rudi Kustijono. 2017. Pengembangan Laboratorium Virtual Berbasis Algodoo untuk Melatihkan Keterampilan Proses Sains Siswa pada Pokok Bahasan Gerak Parabola. Jurnal Inovasi Pendidikan Fisika (JIPF) Vol. 06, No. 03, Hal. 27-35.

Sumarsono, Joko. 2009. Fisika Untuk SMA/MA Kelas X. Jakarta: Pusat Perbukuan.

Sriyani, D.,Koto, I.,Defianti, A., Sakti,I.and Uliyandari, M. (2023) Theeffect of interactive learning media on student’s conceptual understanding, Journal of Teaching and Learning Physics 8(2), 111-124.DOI: http://dx.doi.org/10.15575/jotalp.v8i2.27705

Rahayu, A. T., Jannah, N., Lestari, D. A., & Gumilar, T. (2022). PHYSICS LEARNING MEDIA TO BUILD HIGH SCHOOL STUDENT'S UNDERSTANDING OF MOMENTUM MATERIAL. Journal of Teaching and Learning Physics, 7(1), 23-32.

Teodoro, V. D. (1998). From formulae to conceptual experiments: interactive modelling in the physical sciences and in mathematics. Invited paper presented at the International CoLos Conference New Network-Based Media in Education, Maribor, Slovenia. Diunduh dari http://www.if.ufrgs.br/tex/fis01043/textos/VDTeodoro1998.pdf

www.algodoo.com

Wulandari, N., Adha, E. H., & Setiaji, B. (2022). Pengembangan Media Pembelajaran Berbasis Augmented Reality Pada Materi Optika Geometri. Jurnal Penelitian dan Pembelajaran Fisika Indonesia, 4(1).




DOI: https://doi.org/10.15575/jotalp.v9i2.40414

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Journal of Teaching and Learning Physics indexed by: